What you get from the whole seed
A Nigella sativa seed contains two distinct oil fractions: a fixed oil (mostly fatty acids, primarily linoleic acid) and a volatile oil fraction containing thymoquinone and related compounds. Eating or grinding the seed gives you both. When you extract the oil, the balance between these fractions — and how much of each survives — depends entirely on how the extraction is done.
Cold pressing: the starting point
Cold pressing uses mechanical force to squeeze oil from the seed, without heat or chemical solvents. This matters because thymoquinone is thermally sensitive: temperatures above around 60–70°C begin to degrade the volatile fraction.[1] Cold pressing produces less oil per kilogram of seed than solvent methods, which is part of why it costs more — but it keeps the volatile fraction intact rather than destroying it in the extraction process.
How solvent extraction compares
Solvent extraction (using hexane or similar) is faster and yields more oil per batch. However, residual solvent must be removed using heat, and the process is generally harder on thermally sensitive compounds. Studies comparing cold press against solvent extraction have found measurable differences in antioxidant activity and volatile compound profiles, with cold-pressed oils generally retaining more of the compounds associated with Nigella sativa’s volatile fraction.[2]
Supercritical CO⊂2; extraction: the premium alternative
Supercritical fluid extraction using CO⊂2; (SFE) operates at lower temperatures than solvent methods and leaves no chemical residue. It can selectively extract volatile compounds and tends to produce oils with well-preserved thymoquinone content. The limitation is cost: SFE equipment and running costs are significantly higher than cold pressing, which is why it appears more in pharmaceutical research than in mainstream supplement production.[2]
What composition variation actually looks like
Even within cold-pressed oils, thymoquinone content varies with seed origin, harvest season, storage time and post-pressing handling. A 2024 analysis of commercial Nigella sativa seed oils found significant variation in volatile compounds and quality indicators across products — variation that matters if TQ is the constituent you are aiming for.[3] This is precisely why standardisation (assaying each batch) is the only way to know what is in the bottle rather than estimating from general extraction parameters.
What “standardised to X% thymoquinone” actually means
Standardisation means testing the finished oil from every production batch against a specification before encapsulation. It is not a concentration step — the oil is not spiked with synthetic TQ. It is an assurance process: batches outside specification are rejected. Where a product states only oil weight, there is no batch-level confirmation that the TQ content meets any particular threshold. See our main standardisation guide for more detail.